top of page
#5.png

AMS Blogs

Check Out Our Socials!
  • Youtube
  • LinkedIn
  • Instagram
  • TikTok
  • Facebook

Structural Inspection After a Home Survey: What the Report Should Answer

AMS SURVEYS
Nov 3
5 min read
A Structural Surveyor carrying out a structural inspection after a home survey

A Level 2 or Level 3 survey may recommend further structural investigation when the available evidence is not sufficient for a reliable purchase decision. That recommendation is not a diagnosis, and it does not necessarily mean that the house is unsafe. It identifies a question that needs a more focused scope, better access or specialist analysis.



The next report should answer that question clearly. It should explain what was inspected, what evidence supports the opinion, what remains uncertain, what the buyer should do before exchange and what the likely costs will be. A generic structural survey or a short visual note rarely provides the same value as a properly briefed investigation.



Why a home survey may recommend further investigation

The RICS Home Survey Standard requires the surveyor to report observed matters within the agreed level of service and inspection limitations. A home survey is normally non-intrusive. Floor coverings are not lifted, finishes are not removed and concealed foundations or structural connections cannot be assumed to be satisfactory simply because they are hidden.


Further investigation is appropriate where the decision depends on evidence outside that scope. Examples include cracking with uncertain activity, a removed load-bearing wall, a sagging roof, distorted openings, a corroding steel member, movement around an extension or a lender request for a focused structural opinion.



Define the question before instructing the structural inspection

Send the relevant home survey pages, photographs, estate-agent particulars and any seller documents to the inspecting surveyor. State whether the report is for the buyer, lender, insurer, conveyancer or proposed works. The question might be whether movement is active, whether an alteration has adequate support, whether repair is needed now or whether monitoring is proportionate.


A narrow brief saves time, but it must not exclude relevant context. A crack over a window may relate to a lintel, wall-tie corrosion, thermal movement, foundation movement or an alteration elsewhere. The inspector should be able to consider the surrounding structure, drainage, roof and history where these could influence the conclusion.


What the structural survey should examine

Pattern, geometry and building behaviour

The report should record crack location, direction, taper and continuity, together with distortion, loss of bearing, deflection or separation at junctions. Measurements are useful when related to construction and time. A single crack width is not a diagnosis, and cosmetic damage can sometimes recur without structural instability.



Construction and load paths

The inspector considers how loads pass through roofs, floors, walls, beams and foundations. Extensions, loft conversions, removed chimney breasts and enlarged openings may change those paths. Where work has been altered, available drawings, calculations, Building Regulations records and completion information should be compared with the visible arrangement.


Moisture, drainage and ground factors

Water can weaken materials, corrode embedded steel, decay timber or affect supporting soils. Leaking drains, overflowing rainwater goods, nearby trees, filled ground and previous excavations may be relevant. Their presence does not prove causation, so the report should distinguish observation from inference and recommend only the investigation needed to test the leading explanation.





When opening-up, monitoring or calculations may be required

A visual inspection cannot confirm every concealed detail. With the owner's permission, local opening-up may be needed to see a bearing, connection, timber end or hidden support. Crack monitoring may help where activity cannot be judged from one visit. Drainage testing, trial pits or material testing should each be tied to a defined question.


Where a repair or alteration needs structural design, calculations may be prepared to demonstrate how the proposal meets the relevant requirements. England and Wales have separate Building Regulations systems, although both address structural safety. For general context, Approved Document A for England explains the structural requirements that apply to building work in England. The survey report should state when Building Control and design input are needed rather than present diagnosis as an approval.


What a useful structural report should contain

  • The client's question, property details and inspection date.

  • The agreed scope, access and material limitations.

  • Relevant construction, alteration and documentary history.

  • Clear observations supported by photographs and locations.

  • A reasoned opinion on likely cause, significance and urgency.

  • Alternative explanations where the evidence is incomplete.

  • Proportionate recommendations for repair, monitoring or further tests.

  • Any need for calculations, Building Control, party-wall or other specialist advice.

  • A clear distinction between facts, assumptions and matters for legal enquiry.


Using the report before exchange

Give the report to the conveyancer and lender where relevant. Ask the seller for documents identified as missing. If repair is recommended, obtain a scope that is detailed enough for comparable quotations and establish whether access, consents or temporary works affect cost. A price reduction does not resolve an uninsurable or poorly understood defect.


A focused inspection complements rather than replaces the survey of the whole house. Buyers still need the wider context provided by the appropriate Level 3 Building Survey or Level 2 service. AMS SURVEYS' guide to understanding house cracks provides additional context on how visible damage is classified and investigated.


Common mistakes to avoid

  • Instructing from a one-line recommendation without sending the original survey.

  • Asking for a guarantee that no concealed defect exists.

  • Treating every crack as subsidence or relying on width alone.

  • Accepting a repair quotation as an independent diagnosis.

  • Commissioning calculations before the cause and repair strategy are understood.

  • Waiting until immediately before exchange to resolve lender or insurer requirements.


Agreeing reliance and inspection access

Before the appointment is confirmed, establish who may rely on the report and arrange access to every relevant area. The surveyor may need keys, loft access, safe viewing positions, permission for local opening-up and copies of previous structural or drainage records. If the seller will not permit intrusive work, the report should explain how that restriction affects the conclusion and what risk remains with the buyer. Confirm the reporting deadline early enough for the buyer, lender and conveyancer to consider the findings without creating pressure immediately before exchange.


Frequently asked questions

What is a structural inspection after a home survey?

It is a focused investigation of a structural concern identified by a Level 2 or Level 3 survey, a mortgage valuation or the buyer. It examines the relevant structure, evidence of movement or failure, likely causes, risk, and proportionate next steps rather than repeating the whole-property survey.

No. A Level 3 Building Survey considers the overall property, including its construction, condition, visible defects, maintenance and repair implications. A structural inspection is narrower and concentrates on a defined structural issue, although opening-up, monitoring or calculations may be separately agreed where needed.

Not automatically. Cracking can result from thermal or moisture movement, shrinkage, lintel failure, alterations, settlement, drainage defects or ground movement. The surveyor considers the crack pattern, distortion, construction, history and surrounding evidence before reaching a reasoned opinion or recommending further investigation.

Where a survey or lender has raised a material structural concern, completing the appropriate investigation before exchange usually gives the buyer better evidence for legal enquiries, lending, insurance, negotiation and repair planning; the precise timing should be agreed with the surveyor, conveyancer and lender.


Turn a survey concern into a clear decision

AMS SURVEYS provides focused structural inspections and residential defect surveys across Liverpool and Merseyside, Greater Manchester, Cheshire, Lancashire, North Wales, Leeds, Sheffield, Stoke and the wider North. Send us the home survey recommendation, property details and available photographs so we can advise on a proportionate scope before you commit.



#2.png
Buying a Property?

Find out more about our professional property surveys.

Need our help?

Speak to our team about your property.

An Orange Underline for a SubTitle

MOVE FORWARD WITH CONFIDENCE

Blue Tick

RICS REGULATED

Blue Tick

TRUSTED ACROSS THE UK

Blue Tick

CABE AFFILIATED

Blue Tick

TAILORED REPORTS

bottom of page